For your home or business
We help households and businesses with new heating and plumbing installations and renovations. Describe how the building is used and any business requirements so we can plan the equipment and the work.
Van Molder serviceInstallation
Installation
by Van Molder.
An installation designed around your home, how you use it and future maintenance.
A prepared visit
An installation designed around your home, how you use it and future maintenance.
Van Molder prepares and installs your heating and plumbing equipment at your home. Every project starts from the real needs of the building, the space available and the household’s habits.
- Boilers and heating solutions
- Hot-water production
- Radiators and connections
- Bathrooms, toilets, washbasins and taps
Installing heating or plumbing equipment is more than connecting it: it has to be sized for the home, with drainage, ventilation, access for servicing and compatibility with the existing system all considered. We prepare these points with you before the visit so commissioning goes smoothly.
Whether you are building, renovating or replacing part of the circuit, we explain the options in plain language: type of appliance, location, connections and settings. Once the work is done we check it operates correctly and show you how to use it.
Support for your installation
Plan ongoing care from installation
After commissioning, discuss ongoing care for your gas or oil installation and the options for a servicing agreement. Annual follow-up may be appropriate for the equipment; it does not replace regulatory inspections, whose intervals depend on the fuel and region. Contact us for an estimate and clarify any visit or diagnostic charges before booking.
When to call us
The most common situations
New build or extension
Heating, hot water and sanitary fittings planned from the start, in step with the other trades.
Bathroom or kitchen renovation
Moving water supplies, new drains, a shower, toilet or washbasin to fit.
Boiler or water heater to add
New equipment for a room, a floor or an extra use.
Radiators to add or move
Adjusting heat emission after works or a change in how rooms are used.
What are your obligations?
Gas boilers: inspection intervals depend on your region and the appliance’s output.
Flanders
Every 2 years · from 20 kWMandatory servicing by a recognised gas technician. Below 20 kW, servicing is recommended but not mandatory.
Brussels
Every 2 yearsMandatory periodic EPB inspection by a recognised EPB boiler technician. This includes servicing the appliance.
Wallonia
Every 3 years · up to 100 kWMandatory periodic inspection by a recognised technician; every 2 years above 100 kW. Separate from servicing, it is also required after work on the combustion system.
Intervals for normal operation. Keep the certificates and follow the manufacturer’s servicing instructions. These rules apply to gas, not heating oil.
How it works
A simple three-step process
Discussion
We clarify the property, the equipment you want and your priorities.
Preparation
The solution and connections are prepared before the visit.
Commissioning
The installation is checked and how to use it is explained to you.
How we work
Why choose Van Molder
Diagnosis before repair
We look for the cause, not just the visible effect.
Clear explanations
Findings and options presented in plain language.
Home visits
The engineer comes to your address after a phone conversation.
Reachable 24/7
Time slot agreed by phone; immediate arrival not guaranteed.
Brands
The brands we work on
Click your brand to see our services and, where available, your appliance’s error codes.
Before you call us
What helps us prepare the visit
A few details are enough for a first conversation and to arrive with the right equipment.
- A plan or photo of the intended location
- The brand or model you have in mind, if any
- The energy available (gas, electricity, oil)
- Your town and the schedule of the other works
Frequently asked questions
Your questions about this service
How do I choose the right equipment?
It depends on the home, the number of occupants, the energy available and the space. We discuss it with you before proposing a suitable solution.
Is the installation done in one day?
That depends on the equipment and the connections. The duration is agreed during preparation, before the visit.
Do you work on renovation sites?
Yes. We coordinate supplies and drains with the other trades to avoid rework.
Can you install equipment I have already bought?
In most cases yes, after checking it is compatible with your installation. Send us the reference.
Near you
Find your town
Choose your town to see how we work at your address.
Also worth a look
Our other services
Let’s talk about your project or breakdown
Describe what you need and we will get back to you to agree a time slot.